DSEAR, the Dangerous Substances and Explosive Atmospheres Regulations, is the UK framework (implementing the EU ATEX workplace directive) that requires employers to assess and control risks from flammable, explosive, and otherwise dangerous substances. It reaches any plant handling solvents, fuels, gases, or combustible dusts, and much of what it demands lands squarely on maintenance: the controls it requires are equipment and inspection regimes, not just paperwork. Educational overview, not legal advice.
The regulation’s controls are living systems that decay: ventilation and extraction that must keep flammable concentrations down, zoned equipment whose Ex integrity depends on correct maintenance, bonding and earthing that must stay continuous, and gas detection that must be tested to be trusted (the bump-testing discipline). For combustible dust specifically, the housekeeping and extraction regime is the control, exactly the program in dust explosion prevention. A DSEAR assessment that credits these controls is making a promise the maintenance program has to keep.
A coatings plant’s DSEAR assessment credits local exhaust ventilation for keeping solvent vapor below the lower explosive limit near a mixing station, so the surrounding area is zoned lightly and standard equipment is used nearby. Over a year, the extraction fan’s airflow drifts down (a slipping belt, a fouled duct), unmeasured. The assessment’s central assumption is now false: vapor can accumulate where the zoning assumed it could not, and standard equipment sits in what has quietly become a hazardous zone. The fix is an hour of fan maintenance, but the point is structural: DSEAR compliance is only as valid as the maintenance of the controls it credits. A scheduled airflow check would have caught the drift; its absence turned a paper compliance into a real hazard.
A DSEAR inspection asks to see the assessment, the zoning, and then the evidence that the credited controls actually work: extraction airflow tests, gas detector calibration and bump records, bonding continuity checks, Ex equipment maintenance. The plant that can produce that evidence demonstrates a living control system; the plant that cannot has an assessment describing a factory that may no longer exist.
Fabrico is not a DSEAR assessment tool and does not classify zones or set control measures, competent people and safety engineers do that. What Fabrico keeps true is the maintenance half of every credited control: ventilation and extraction on airflow-verified schedules, gas detectors on bump and calibration routines, bonding and earthing on continuity checks, Ex equipment and housekeeping on inspection routes, all as recurring work orders with recorded values and defects escalated at safety priority. The assessment says what protects the plant; Fabrico proves the protection is maintained, and keeps that record under EU governance. EU-built, with EU data residency.
They are closely linked. DSEAR is the UK regulation that implements the requirements of the EU ATEX workplace directive (and related provisions); the ATEX equipment directive governs the equipment sold for explosive atmospheres. In practice DSEAR sets the employer’s duties, including zoning and equipment selection, and ATEX marking identifies compliant equipment.
Yes. Explosive atmospheres include clouds of combustible dust, not just flammable gases and vapors, so dust-handling operations (wood, flour, sugar, metals, many plastics) are squarely within DSEAR, with housekeeping and extraction as central controls.
A competent person with knowledge of the substances, the process, and explosion risk, often supported by specialists for zoning and equipment selection. Maintenance input matters because the assessment credits controls that maintenance must sustain; assessors who ignore whether controls are actually tested build assumptions on sand.
Want the maintenance behind every DSEAR control provably alive? Book a Fabrico demo to see explosive-atmosphere control discipline run through a field-ready CMMS.
Anmeldung
Blog
