Aerospace and Defense Manufacturing: 6 Best OEE Tools Compared (2026 Review)

Key Takeaways
-
The long cycle challenge: In Aerospace, a part might be on a 5-axis mill for 20 hours. Standard OEE calculations (Parts Per Minute) fail here. You need software that tracks "Utilization" and "Earned Hours."
-
AS9100 is Non-Negotiable: Speed cannot come at the cost of compliance. Traceability, digital sign-offs and FOD (Foreign Object Debris) checks usually sit in the MES or quality system, so the OEE tool must work beside them.
-
The Cost of Scrap: Scrapping a titanium bulkhead because a machine drifted out of calibration throws away the material and every machine hour already spent on it. Live machine data is critical.
-
Tools compared: Fabrico, MachineMetrics, Parsec TrakSYS, Plex, iBase-t Solumina and Memex, plus five MES products for aerospace and defense, each described from the vendor's own site.
Aerospace manufacturing is an anomaly in the OEE world.
In a bottling plant, OEE is about seconds. In an Aerospace plant, OEE is about hours.
That difference is why this review stays with aerospace and defense plants. For the wider market, see the buyer's guide to the best OEE software, or how Fabrico's OEE software tracks OEE by line and shift.
When you are machining a landing gear strut from a solid block of titanium, or curing a composite wing skin in an autoclave, "Speed" is secondary to "Precision" and "Utilization."
The bottleneck in Aerospace is often Setup (loading massive fixtures), Documentation (waiting for Quality sign-offs), or Asset Availability (is the 5-axis mill calibrated?).
Generic OEE tools often fail in Aerospace because they assume you are making 100 parts a minute. You need software that understands Low-Volume, High-Value production.
Here are 6 OEE and Production Monitoring tools for the Aerospace & Defense sector.
Fabrico: 5-axis utilization and inspection stops
Aerospace shops run long cycles, so a machine paused for in-process inspection or waiting on a first article is the hidden OEE loss.
Fabrico separates run time from pauses on each 5-axis machine. Calibration tasks can go in the built-in CMMS if you want them there.
Key Features for Aerospace:
-
Long-Cycle Tracking: Output against ideal cycle time reveals jobs that take longer than programmed.
-
Inspection Pauses: Operators code a stop as in-process inspection, and the lost hours add up in the reports.
-
Past Period Analysis: Pull downtime by cause and machine for any earlier month or quarter.
-
Audit Log: Edits to data are recorded, along with who is allowed to change what.
Where it fits: Aerospace machine shops that want true utilization on long-cycle work.
MachineMetrics: CNC utilization
MachineMetrics is a powerhouse in the precision machining world.
Since Aerospace is heavily dependent on complex CNC machining (Titanium, Inconel), MachineMetrics is a strong fit.
It connects directly to the control (Fanuc, Siemens, Heidenhain) to visualize the Spindle Load and Feed Rate Override.
This is critical because operators often slow down feed rates to "be safe" on expensive parts. MachineMetrics exposes this "Performance Loss" instantly.
Where it fits: Precision machining cells focused on cycle time optimization.
iBase-t Solumina: complex assembly MES
Solumina is an MES (Manufacturing Execution System) designed specifically for complex discrete industries like Aerospace and Defense.
It is less of a simple OEE tracker and more of a Shop Floor Control system.
It excels at managing the "As-Built" record. It tracks serial numbers, engineering change orders (ECOs), and complex assembly instructions.
If your OEE problem is "Technicians waiting for updated drawings," Solumina is the answer.
Where it fits: Final Assembly of aircraft or complex subsystems (Satellites, Engines).
Parsec TrakSYS: real-time operations management
TrakSYS is a modular MOM (Manufacturing Operations Management) platform.
It is highly flexible. You can build custom workflows for managing Autoclave cycles or chemical processing lines (anodizing/plating).
It is strong on Inventory & Material Flow, helping to ensure that the expensive carbon fiber material doesn't expire before it hits the mold.
Its OEE engine is robust and can handle the "Long Cycle" math, so ask the vendor to show it on a job where one part runs for a full shift.
Where it fits: Mixed-mode aerospace plants (Machining + Chemical Processing).
Plex: cloud ERP and MES
Plex is a popular choice for Tier 1 and Tier 2 Aerospace suppliers.
Because it is a full Cloud ERP, it connects OEE directly to the Financials.
In Aerospace, "Job Costing" is vital. You need to know exactly how many hours of machine time went into Part X to bid correctly on the next contract.
Plex captures this data automatically. It ensures that your OEE improvements translate directly into margin visibility.
Where it fits: Tier 1 Suppliers needing to integrate OEE with Finance and Quoting.
Memex: legacy machine connectivity
Memex (known for its MERLIN platform) is a pioneer in machine connectivity.
Aerospace shops often have "Monuments": massive gantry mills or riveters, 30 years old but still perfectly accurate.
Memex specializes in connecting these legacy assets using hardware adapters (MTConnect).
If you have a factory full of older machines that cannot speak to modern software, Memex helps you get a baseline OEE signal from them.
Where it fits: Brownfield aerospace plants with legacy capital equipment.
MES for aerospace and defense: what buyers compare
A plant that must keep an as-built record for every serial number, with digital work instructions, operator sign-offs and audit evidence for AS9100, needs a full MES. A plant that mainly needs to know where its 5-axis hours go needs an OEE layer on the machines first. The two can run side by side. The table covers five MES and MOM (manufacturing operations management) products whose own sites describe aerospace and defense work, and what each site says.
| Product (vendor) | What its own site says it does | Aerospace fit signals the vendor states | Price as published | Source |
|---|---|---|---|---|
| Solumina (iBase-t) | Manufacturing, quality and MRO (maintenance, repair and overhaul) on one platform, with quality management embedded in production processes | "FAA compliance to AS9100 regulatory standards like AS9102, AS9131, and AS9121"; "lot and serial tracked parts for all materials, components, and subassemblies"; work instructions with "built-in data collection, signature prompts"; can be deployed on an AWS Virtual Private Cloud, and "Azure and Gov Cloud deployments are also available" | No price on the pages read; quote on request | iBase-t A&D page; cloud MES page |
| Opcenter Execution Discrete (Siemens) | MES for discrete manufacturing. Its aerospace and defense section says close collaboration with PLM software lets plants manage flexible, complex assembly in low-volume, high-variance work | Handles engineering or production change orders across work orders, materials and processes, "even after production runs have started"; captures "all deviations detected during inspections". AS9100 and ITAR are not named on the page read; ask | No price on the pages read; quote on request | Siemens product page |
| DELMIA Apriso (Dassault Systèmes) | MOM that "provides all the core functionality required in a traditional MES, including production tracking, work instructions, and machine connections", with built-in quality management | Enforces "operator skill and certification requirements"; in a May 2023 release, aerostructures maker Sonaca chose it for manufacturing operations, to remove paper and limit the risk of errors. AS9100 and ITAR are not named on the pages read; ask | No price on the pages read; quote on request | DELMIA Apriso page; Sonaca release |
| Proficy Smart Factory MES (Velotic; Proficy came from GE Vernova) | "Routes, order execution, automated quality checks, and the full as-built traceability record live in one system" | A digital traveler that "carries the route, the work instructions, the operator sign-offs and the test results"; a GE Aerospace customer story on the same page; a cloud-native MES option. AS9100 and ITAR are not named on the page read; ask | No price on the pages read; quote on request | Velotic A&D page; Velotic home page (Proficy origin) |
| Composable MES (Tulip) | Workflows that teams "build and change" without writing code; operators "follow step-by-step instructions with real-time checks" | "Built-in audit trails, e-signatures, and ITAR-ready access controls support compliance with AS9100 and FAA requirements"; add-ons for AWS GovCloud and an environment that "has achieved FedRAMP Moderate Equivalency" | Essentials $100 and Professional $250 per interface per month, billed annually, 10-interface minimum. The Enterprise and Regulated Industries plans (the latter names aerospace and defense) show no price | Tulip A&D page; Tulip plans page |
Every cell comes from the vendor's own pages, read on 16 November 2026, including the price column. Text in quotation marks is exact; the rest is a tight paraphrase. A gap means the page read does not say it, so ask the vendor.
Questions to ask an aerospace MES vendor
- Show the as-built record for one serial-numbered assembly, from material lot to final sign-off. What changes when a nonconformance is raised?
- How does an engineering change reach a work order that is already on the floor, and what does the operator see at the station?
- Which AS9100 and AS9102 first article requirements does the product cover as shipped, and which need configuration or custom work?
- Where is the data hosted, and what does the vendor state in writing about ITAR, CMMC and government cloud hosting?
- How do machine cycles and stops reach the MES, and what does one line cost per year with that included?
Fabrico is a light MES and OEE platform (machine data, downtime with reasons, OEE), not a full aerospace MES with as-built records, so in an AS9100 plant it can run beside one of the systems above.
Comparison: Precision vs. Speed
Which tool handles the complexity of Aerospace?
| Feature | Fabrico | MachineMetrics | Solumina | Parsec | Plex |
| Primary Strength | OEE & Line Downtime | CNC Data (Feeds/Speeds) | Complex Assembly (MES) | Flexibility (MOM) | ERP Integration (Costing) |
| Cycle Type | High-Mix / Long-Cycle | Precision Machining | Complex Assembly | Mixed Mode | Enterprise |
Conclusion: Don't Fly Blind
In Aerospace, OEE is not about running faster; it is about running smarter.
It is about ensuring that when you load a $20,000 billet of aluminum, the machine is calibrated, the operator has the right instructions, and the cutter is sharp.
If you need deep CNC analytics, look at MachineMetrics.
If you need full assembly traceability, start with Solumina, whose own site names AS9100 and lot and serial tracked parts.
But if you want a platform that leads with OEE and Downtime, with maintenance built in, Fabrico fits that brief, and it can run beside a full aerospace MES.
Ready to clear for takeoff?
See how Fabrico tracks OEE and downtime for aerospace.
Turn downtime into a number your team can actually act on.
Request a demoRelated articles

Real Fabrico tiles, sample data.










