Menu
Book a demo
Resin Prices for Plastics Converters: A Monthly Tracker of PE, PP, PVC and PET

Resin Prices for Plastics Converters: A Monthly Tracker of PE, PP, PVC and PET

Monthly PE, PP, PVC and PET resin prices from Eurostat, BLS and the World Bank, and what a rise costs a moulder in scrap, start-up waste and part weight.
Resin Prices for Plastics Converters: A Monthly Tracker of PE, PP, PVC and PET

In short: Resin prices reach a moulding or extrusion plant twice: once on the invoice and once in every gram that leaves the press as something other than a good part. This tracker follows PE, PP, PVC and PET resin prices each month from official public series (Eurostat, the BLS, the World Bank and the Federal Reserve) and turns each move into the measures a plastics converter controls: scrap and regrind priced at the new rate, start-up waste per changeover, cycle drift, part weight against nominal, and which jobs to run first, ranked by margin per kilogram of resin.

  • September 2026 against January to March 2026, EU imports from outside the EU (Eurostat Comext unit values): polypropylene up 36.0% to EUR 1.507 a kg, PET up 32.3%, polyethylene up 31.3% and unmixed PVC up 24.7%.
  • Converters' selling prices moved about half as far as resin producer prices: Eurostat's EU index for plastics in primary forms rose 13.5% over the same months, its index for plastics products 6.7%. In the US, the BLS thermoplastic resins index was up 10.1% in October, plastics products 5.7%.
  • Example plant: one PP pail press uses 188.12 kg of resin per 1,000 good pails against a nominal 182.50 kg. The 131.62 kg a week above nominal costs EUR 145.83 at the first quarter import value and EUR 198.34 at September's.

Tracker, updated 19 November 2026. Next update: December 2026, with the October Eurostat figures and the November BLS and World Bank releases. Sources are listed at the end.

A plant that measures OEE for plastics manufacturing by machine, line and shift already holds the data it needs to read a resin price rise in its own numbers. The price itself is set outside the plant. What the plant sets is how much resin goes into each good part: the grams over nominal weight, the purge and the first shots after each mould or colour change, the parts rejected and sent to the bin, and the runners that go back through the granulator. When resin rises by a third, each of those grams costs a third more, and the ranking of jobs on a constrained press can change. This page tracks the official price series behind that arithmetic each month and turns the latest move into checks a plant, production or process engineering manager can run on an injection moulding or extrusion line this week.

The scope is the four commodity polymers that converters buy by the truckload: polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC) and polyethylene terephthalate (PET). Prices come only from public, official series that anyone can check: Eurostat, the U.S. Bureau of Labor Statistics (BLS), the World Bank and the Federal Reserve. Resin maker and converter cases come only from the company's own dated release or filing. Price reporting agencies that sell their assessments are not used, so the figures here are monthly averages and index levels, not daily spot quotes.

PE, PP, PVC and PET: where resin stood each month to October 2026

No single official series quotes all four polymers. Eurostat's trade database gives monthly import values and quantities by customs code, so the value per kilogram of EU imports from outside the EU can be read for each polymer. The BLS publishes one index for thermoplastic resins as a group; its item list has no separate PE, PP, PVC or PET resin index. Eurostat's producer price index covers the whole NACE class of plastics in primary forms. The table puts them side by side against the January to March 2026 average, the last quarter before the spring jump.

SeriesUnitJan to Mar 2026Aug 2026Sep 2026Oct 2026Latest vs Jan to Mar
Polyethylene, EU imports (CN 3901)EUR/kg0.9891.3841.299not yet out+31.3%
Polypropylene and other olefin polymers, EU imports (CN 3902)EUR/kg1.1081.5711.507not yet out+36.0%
PVC, not mixed, EU imports (CN 3904 10 00)EUR/kg0.6810.9340.849not yet out+24.7%
PET, viscosity 78 ml/g or more, EU imports (CN 3907 61)EUR/kg0.8601.1571.138not yet out+32.3%
EU producer prices, plastics in primary forms (NACE C20.16)Index 2021 = 10099.9113.8113.3not yet out+13.5%
US PPI, thermoplastic resins and plastics materials (WPU066212)Index Dec 2003 = 100181.026196.643195.812199.280+10.1%
US PPI, resin makers' thermoplastic output (PCU3252113252111)Index Dec 1980 = 100272.469293.433293.184296.922+9.0%

Sources: Eurostat Comext dataset DS-045409, updated 13 November 2026 (value in euros divided by quantity, EU27 imports from outside the EU; the quarter is total value over total quantity); Eurostat producer prices in industry, sts_inpp_m, updated 17 November 2026, not seasonally adjusted; BLS series WPU066212 and BLS series PCU3252113252111, not seasonally adjusted, July to October 2026 preliminary. Percentages are calculated on this page from the published values.

Three readings carry the rest of the page.

  • The polymer a plant buys matters more than the headline. Between the first quarter and September, PP imports rose 36.0% and PVC 24.7%. A plant that moulds PP closures and one that extrudes PVC profile read different months from the same tracker.
  • The peak has passed, the level has not. EU PVC imports were 10.8% below their July high in September and PE 8.3% below; the US thermoplastic resins index was 9.6% below its May peak of 220.496 in October. All of them were still above the first quarter.
  • Converters' prices lag resin. Resin producer prices moved about twice as far as the price of the parts made from them, and the import values three to five times as far (see the squeeze table below). The gap sits in the converter's margin until a contract clause or a price talk closes it.
Resin rose further than partsChange on the Jan to Mar 2026 averagePP, EU imports, Sep+36.0%PET, EU imports, Sep+32.3%PE, EU imports, Sep+31.3%PVC, EU imports, Sep+24.7%EU resin producer prices, Sep+13.5%US PE film and sheet, Oct+10.9%US thermoplastic resins, Oct+10.1%EU plastics products, Sep+6.7%US plastics products, Oct+5.7%Feedstock and capacity, October 2026US$125.0Brent a barrelOct, World BankUS$28.50EU gas, mmbtuOct, TTF77.6%US plastics andrubber capacityThe index says what resin costs.The press record says where it went.
Resin and plastics product prices at the latest month against the January to March 2026 average, from Eurostat and the BLS. See the Eurostat producer price data; import values from Eurostat Comext and US indexes from the BLS, percentages calculated on this page.
Track OEE and downtime in real time
Book a demo

Why the official series disagree: polymer, region and feedstock

The trade unit values rose by about a third, the producer price indexes by a tenth to a seventh. Three things explain the distance, and each one decides which row of the tracker a buyer should read as its own cost.

Import values against producer indexes

An import unit value is total value over total weight for a customs code, so it moves with the grade mix as well as the price: a month with more specialty PP in the mix reads higher. A producer price index follows fixed products and contract terms, including long term contracts that reprice slowly. Neither is the price a given plant pays. A plant on a monthly contract linked to a published assessment will see moves closer to the trade values; a plant on a quarterly fixed price will see them later and smoothed.

Ethane in the US, naphtha in Europe

The U.S. Energy Information Administration explains in its note of 4 November 2024 that US crackers have historically earned higher margins cracking ethane, while naphtha is the most common cracker feedstock in Western Europe and East Asia, and that US ethylene sells at a discount to international prices on average. The World Bank Pink Sheet of 3 November 2026 shows how far the two feedstock worlds split this year:

Feedstock benchmarkUnitJan to Mar 2026Apr to Jun 2026Aug 2026Sep 2026Oct 2026Oct vs Jan to Mar
Crude oil, BrentUS$/bbl80.5104.490.9116.8125.0+55.3%
Natural gas, Europe (TTF)US$/mmbtu13.6315.5821.1125.4228.50+109.1%
Natural gas, US (Henry Hub)US$/mmbtu4.752.952.772.952.96minus 37.7%

Source: World Bank Pink Sheet, quarterly and monthly averages; percentages calculated on this page. Oil and European gas rose sharply into October while US gas fell. For a resin buyer this is a reason to keep the US and EU rows apart: a US PE price rests on ethane crackers, a European one on naphtha crackers, and naphtha is a refinery product. European gas also enters a converter's own energy bill, which is where Westlake and Amcor both placed part of their third quarter cost pressure (see the notes below).

Capacity in use at the converters

The Federal Reserve's G.17 release of 17 November 2026 puts capacity utilization for US plastics and rubber products (NAICS 326) at 77.6% in October 2026, preliminary, up from 74.8% in the first quarter and 76.2% in September, against a 1972 to 2025 average of 81.6%. The same release names plastics and rubber products among the indexes that rose in October. The chemicals industry, where resin is made, ran at 71.8%. Converters were busier through the price rise, not idle, which is the case in which the grams lost per good part matter more: the press time spent on scrap and start-up shots is time a paying job could have used. How this output data fits the wider North American picture is set out in the North America factory output tracker.

Resin up, parts price behind: the converter squeeze in the numbers

The squeeze is the difference between what a converter pays for resin and what it is paid for parts. The official indexes show it on both sides of the Atlantic.

Pair of seriesResin side, latest vs Jan to Mar 2026Products side, latest vs Jan to Mar 2026Latest month
EU, Eurostat producer pricesPlastics in primary forms (C20.16): +13.5%Plastics products (C22.2): +6.7%September 2026
US, BLS producer pricesThermoplastic resins (WPU066212): +10.1%Plastics product manufacturing (PCU3261--3261--): +5.7%October 2026, preliminary
US, film extrudersThermoplastic resins (WPU066212): +10.1%Unlaminated PE film and sheet (WPU072205011): +10.9%October 2026, preliminary

Sources: Eurostat sts_inpp_m; BLS series PCU3261--3261-- and WPU072205011, with WPU066212 as above. The film row is the exception: the PE film and sheet index rose from 129.459 in the first quarter to a May high of 157.516 and stood at 143.592 in October, in step with resin. Film sells close to the resin it is made from, so its price follows faster. Moulded and extruded parts with more press time per kilogram, such as closures, technical parts and profile, carry a larger share of other costs, and the parts index moved less.

For a moulder the practical reading is that the products index will not close the gap on its own. Each gram above nominal, each rejected part and each kilogram of purge is bought at the new resin price and sold, as a good part or not at all, at a price that moved about half as far.

Five measures on the press and the extruder when resin moves

A resin price rise does not create new losses. It reprices the ones already in the line record. The table maps each to where it sits in OEE and to what a moulder or extruder has to record for the money to be readable.

MeasureWhere it sitsWhat to recordHow to price it at the new rate
Scrap and regrindQualityRejected parts by reason and shift; runner and reject weight; how much regrind went back and at what ratioParts that go to the bin at the replacement resin price, not the price of the lot they were made from; regrind only up to the ratio the part spec allows
Start-up waste per changeoverAvailability for the time, quality for the partsPurge weight and the shots or metres before the first good part, for each mould, colour or gauge changeKilograms per changeover times the new price, times the changeovers in the week
Cycle driftPerformanceActual cycle against the standard cycle, by press and shiftFewer good parts in the same hours; the fixed purge and start-up resin spread over fewer parts
Part weight against nominalYield and give-awayAverage part weight from the plant's scale, against the drawing's nominal, by press and shiftGrams over nominal times good parts times the new price
Which jobs run firstMargin, not OEEMeasured resin per good part for each product, and the margin per part from financeMargin per kilogram of resin: margin per part over measured resin per part

Cycle drift on a moulding cell, and how it hides inside performance, is set out in OEE for injection moulding. The same measures on a film line, where start-up waste is metres of off gauge film and give-away is film thicker than spec, are in OEE for blown film extrusion. The difference between losses at start-up and losses while running is covered in start-up loss against reduced yield, and a list of scrap reasons that keeps purge apart from reject parts is in a scrap reason code taxonomy.

Resin maker and converter notes, newest first

Each note comes from the company's own release, filed with the SEC, with its date. New notes are added at the top.

Westlake, 4 November 2026: PEM prices down 8% on the quarter

Westlake's third quarter 2026 release reports that the average sales price of its Performance and Essential Materials segment fell 8% from the second quarter, particularly for PVC resin and polyethylene, as the price increases of the second quarter, made at the onset of the Middle East conflict, moderated. Against the third quarter of 2025 the segment's average sales price was 9% higher. The segment's EBITDA margin excluding identified items was 11%, against 21% in the second quarter, with higher European energy costs among the reasons. The company is closing its PVC plant in Cologne, Germany, and says PEM selling prices had stabilized with upward momentum entering the fourth quarter.

  • An 8% fall in a quarter is a reason to re-read contract dates. A PVC profile extruder on a quarterly price set at the second quarter peak paid the high price for three months after the resin maker's own price fell. The purchase date behind each lot sets the price a scrap kilogram is worth.
  • A closed plant changes the supply side, not this month's price. The Cologne closure takes PVC capacity out of Europe; Eurostat's PVC import value already rose 24.7% from the first quarter to September. A European PVC buyer reads both rows before it fixes the next contract.

Amcor, 4 November 2026: resin pass-through at 8% of net sales

Amcor's release for the quarter ended 30 September 2026 states that the pass-through of movements in raw material costs raised net sales by about US$435 million, 8% of net sales, with volumes about 1% higher than a year earlier. The release ties a free cash outflow of US$820 million to working capital effects of resin price volatility related to the Middle East conflict, and lowers the company's earnings outlook for the July to December 2026 transition period because energy and distribution costs rose late in the quarter and pass through later.

  • Pass-through covers the resin price, not the resin wasted. A clause that moves the part price with a resin index pays the converter for the nominal weight in the contract. The grams above nominal, the purge and the rejected parts stay with the converter at the new price, which is why the line measures above matter more after a pass-through, not less.
  • Working capital moves before margin does. Resin bought at a higher price sits in silos, in work in progress and in finished parts. The kilograms of regrind waiting in boxes are part of that stock and are worth the new price, not the old one.

LyondellBasell, 30 October 2026: PE margins about 50% above 2025

LyondellBasell's third quarter 2026 release says the industry's integrated polyethylene margins ended the third quarter about 50% above 2025 levels, helped by price gains in September, and that customer buying patterns have been affected by inventory levels and price volatility. Profitability in its Americas olefins and polyolefins segment fell from the second quarter on lower polymer and olefin prices; in Europe, Asia and International, polymer prices fell. For the fourth quarter the company expects operating rates of 85% for its North American olefins and polyolefins assets and 60% for its European ones.

  • A 60% operating rate in Europe is a supply signal for European PE buyers. Lower rates at a supplier can mean longer lead times and less choice of grade. A converter that qualifies a second grade or a second supplier needs trial shots, and those trials belong in the line record as production with their own rejects.
  • Inventory swings by the buyer show up as erratic resin deliveries. The release's remark on buying patterns describes converters stocking up and running down. On the floor that reads as presses waiting for material, a stop with its own reason; how to record it is in waiting for material in OEE.

Case: the spring 2026 resin spike and its partial unwind, April to October 2026

The spring of 2026 is the clearest case in this tracker of a resin move large enough to change the line arithmetic. Brent rose from US$80.5 a barrel in the first quarter to US$104.4 in the second, and the resin series rose in the same months.

MonthWhat the sources showResin readingWhat a converter checks
Jan to Mar 2026Brent US$80.5; EU PP imports EUR 1.108 a kgThe baseline on this pagePart weights and reject rates at the old price, as the before picture
Apr to Jun 2026Brent US$104.4; Westlake price increases at the onset of the Middle East conflictUS thermoplastic resins index peaks at 220.496 in May; EU PP imports EUR 1.575 in JuneWhich contracts repriced and when
Jul to Sep 2026Westlake PEM price down 8% on the quarter; LyondellBasell PE price gains in SeptemberEU PVC imports EUR 0.849 in September, 10.8% below JulyLots bought at the peak still in silos or in regrind boxes
Oct 2026Brent US$125.0; TTF US$28.50; G.17 plastics and rubber at 77.6%US thermoplastic resins index 199.280, up from 195.812 in SeptemberGrams over nominal and start-up waste at the new price, press by press

Sources: World Bank Pink Sheet, Eurostat Comext, BLS WPU066212, Federal Reserve G.17 and the company releases above. What this case changes for a moulder or extruder:

  • Price the regrind boxes at the replacement cost. With EU PP imports at EUR 1.507 a kg in September against EUR 1.108 in the first quarter, a kilogram of PP regrind that can go back into a part is worth 36.0% more than it was in March. Reject parts that cannot go back are lost at that price.
  • Keep the US and EU readings apart. The US index rose again in October while Henry Hub gas stayed below US$3.00; European gas more than doubled from the first quarter. A plant buying in both regions reads two different months.
  • Read the October rise as one month, not a direction. The US index rose 1.8% from September to October, after four months of falls from its May peak. This tracker records it; whether it continues is for the next edition to show, not for this one to guess.

Converters supplying food packaging face a second change on top of resin, covered in plastic to fiber packaging on food lines.

Book a demo and see OEE and losses per line and shift.

Worked example: resin per good part on a PP pail press

Example plant. Every operating figure in this section is Example data; the resin prices are the Eurostat Comext unit values for EU imports of PP (CN 3902) above, used as the Example contract price. The plant is not any company named above.

The Example plant runs one injection moulding press with a 2 cavity mould for a 5 litre PP pail. The nominal part weight on the drawing is 182.5 g, and each shot also makes a 12.0 g cold runner. The press runs 5 days on 3 shifts of 460 planned minutes, 6,900 minutes a week, with 452 minutes of stops including 3 changeovers, so 6,448 minutes of run time. The standard cycle is 30.0 s, an ideal rate of 4 pails a minute. The part spec allows regrind only from the job's own runners, so runners go back through the granulator and rejected pails and purge go to the bin. Each changeover takes 3.6 kg of purge and 14 start-up shots (28 pails) before the first good part is signed off.

Step 1: two weeks from the line record. Week A is a normal week in the first quarter. Week B is a week in October, after the resin rise, in which the cycle has drifted to 32.5 s and the average part weight on the plant's scale has crept to 184.7 g.

MeasureWeek A, normalWeek B, drift
Run time6,448 min6,448 min
Average cycle31.0 s32.5 s
Shots6,448 x 60 / 31.0 = 12,4806,448 x 60 / 32.5 = 11,904
Pails made24,96023,808
Rejects84 start-up + 156 = 24084 start-up + 291 = 375
Good pails24,72023,433
Average part weight183.1 g184.7 g
Availability6,448 / 6,900 = 93.45%93.45%
Performance30.0 / 31.0 = 96.77%30.0 / 32.5 = 92.31%
Quality24,720 / 24,960 = 99.04%23,433 / 23,808 = 98.42%
OEE24,720 / (6,900 x 4) = 89.57%23,433 / (6,900 x 4) = 84.90%

Example data. Week B makes 1,287 fewer good pails and loses 4.67 points of OEE, almost all of it in performance: the cycle drift costs 1,152 pails, the extra rejects 135.

Step 2: virgin resin used. Runners return as regrind, so the virgin resin in a week is the weight of every pail made plus the purge. Week A: 24,960 x 183.1 g = 4,570.176 kg, plus 3 x 3.6 kg = 10.8 kg of purge, 4,580.976 kg. Week B: 23,808 x 184.7 g = 4,397.3376 kg, plus 10.8 kg, 4,408.1376 kg.

Step 3: resin per good part, and where the excess goes. Week A uses 4,580.976 / 24,720 = 185.31 kg of resin per 1,000 good pails; week B 4,408.1376 / 23,433 = 188.12 kg, against the nominal 182.50 kg. Week B's excess over nominal is 4,408.1376 minus 23,433 x 182.5 g = 4,408.1376 minus 4,276.5225 = 131.6151 kg, made up of three parts:

  • part weight over nominal: 23,433 x 2.2 g = 51.5526 kg, or 2.20 kg per 1,000 good pails;
  • rejected pails: 375 x 184.7 g = 69.2625 kg, or 2.96 kg per 1,000;
  • purge: 10.8 kg, or 0.46 kg per 1,000.

51.5526 + 69.2625 + 10.8 = 131.6151 kg, and 182.50 + 2.20 + 2.96 + 0.46 = 188.12 kg per 1,000 good pails. Week A's excess on the same basis is 4,580.976 minus 24,720 x 182.5 g = 4,580.976 minus 4,511.4 = 69.576 kg.

Where the extra resin goesExample plant, week B, per 1,000 good pailsRejected pails: 2.96 kgWeight over nominal: 2.20 kgStart-up purge: 0.46 kgNominal 182.50 kg plus 5.62 kg = 188.12 kg.At EUR 1.507 a kg: EUR 283.49 per 1,000.Week A at EUR 1.108 a kg: EUR 205.33.
Example data. Bars to scale, 120 px per kg. Resin priced at the Eurostat Comext unit value of EU PP imports, January to March and September 2026.

Step 4: price it at both resin rates. The sourced range runs from EUR 1.108 a kg (first quarter) to EUR 1.507 (September).

ItemAt EUR 1.108 a kgAt EUR 1.507 a kg
Week A virgin resin, 4,580.976 kgEUR 5,075.72EUR 6,903.53
Week B virgin resin, 4,408.1376 kgEUR 4,884.22EUR 6,643.06
Week A excess over nominal, 69.576 kgEUR 77.09EUR 104.85
Week B excess over nominal, 131.6151 kgEUR 145.83EUR 198.34
Week B excess over 48 weeks, 6,317.5248 kgEUR 6,999.82EUR 9,520.51

Example data; for example, 131.6151 x 1.507 = 198.34 and 6,317.5248 x 1.507 = 9,520.51. Per 1,000 good pails, resin costs 185.31 x 1.108 = EUR 205.33 in week A and 188.12 x 1.507 = EUR 283.49 in week B. Of the EUR 78.16 difference, the price rise on week A's usage is 185.31 x 0.399 = EUR 73.94 and the extra 2.80 kg of usage at the new price is EUR 4.22 (Example sums carried with unrounded weights).

Step 5: read the result. The price rise is the large number and the plant cannot change it. The drift is the smaller number and the plant can: the 62.0391 kg of week B excess above week A's costs EUR 93.49 a week at September's price, EUR 4,487.66 over 48 weeks, on one press. The cycle drift barely moves resin per part, because the purge is fixed and spread over 1,287 fewer pails; it costs press time and 1,152 pails. The weight creep and the extra rejects carry the resin. Three caveats: the import unit value stands in for a contract price and is used for scale; the energy, labour and regrind handling costs are not priced; and a plant on a quarterly contract meets the September price when its contract resets.

Step 6: the same arithmetic on an extruder. An Example blown film line runs at 450 kg an hour and takes 35 minutes after a gauge change to come back on spec, 262.5 kg of off spec film per changeover. At the EU PE import value that film is worth EUR 259.61 at the first quarter's EUR 0.989 a kg and EUR 340.99 at September's EUR 1.299, EUR 81.38 more per changeover, before it is reprocessed or sold as scrap.

Which jobs first when resin spikes: margin per kilogram

When resin is dear or short, the job with the highest margin per part is not always the job with the highest margin per kilogram of resin. The ranking is margin per part divided by measured resin per good part, with both numbers from the plant: the resin from the line record and the plant's scale, the margin from finance. The Example press family runs three products:

Product (Example)Measured resin per 1,000 good partsMargin per 1,000 good partsMargin per kg of resinOutranks the pail per kg unless
5 litre pail188.12 kgFrom finance (M1)M1 / 188.12Reference
Pail lid43.4 kgFrom finance (M2)M2 / 43.4M2 is below 23.07% of M1
Stacking crate1,236.0 kgFrom finance (M3)M3 / 1,236.0Outranks only if M3 is above 6.57 times M1

Example data for the resin column; margins are left to the plant and are not assumed here. 43.4 / 188.12 = 23.07% and 1,236.0 / 188.12 = 6.57. Three rules make the ranking honest:

  • Use measured resin, not the drawing. The pail's 188.12 kg per 1,000, not its nominal 182.50 kg, goes in the denominator, because the rejects and the purge are bought too. A job with high start-up waste on short runs ranks lower than its drawing suggests.
  • Use the new price in the margin. A margin per part calculated at the first quarter resin cost overstates heavy parts more than light ones after a third on the resin price.
  • Check press time as well. When resin is available and only dear, press hours may be the tighter limit, and the ranking per press hour in contribution margin per line hour is the second check. The per kilogram ranking leads only while resin itself is the constraint.

Pass it on, tighten the press or move the jobs: choosing

A converter facing a resin rise has four routes. They combine, and the line data decides between them once each is costed in kilograms and euros.

RouteChoose it first ifAnchor on this pageWatch for
Pass the price throughContracts carry a resin clause, or customers accept a price talkAmcor: about US$435 million of pass-through, 8% of net sales, in one quarterThe clause pays for nominal weight only; the waste stays with the plant
Bring part weight back to nominalThe scale shows parts running heavy on a stable processExample: 2.20 kg per 1,000 good pails over nominal, 51.5526 kg in week BShort shots and rejects if weight is cut past the process window
Cut start-up waste and rejectsChangeovers are frequent and runs shortExample: 2.96 kg per 1,000 in rejects; 262.5 kg of film per extruder gauge changeRushing first off sign-off to save shots, which moves the loss into running rejects
Re-sequence jobs by margin per kgResin is short for weeks, or one grade is on allocationExample: the lid outranks the pail unless its margin is below 23.07% of the pail'sRunning the job with the best margin per part instead of per kilogram

The first good part after a change, and how its sign-off sets the start-up waste, is the subject of first off approval after a changeover. Pipe and profile lines, where start-up waste is metres and weight is grams per metre, are covered in OEE for pipe and profile extrusion.

Questions to put in writing to a supplier of line data software:

  • Can each press or line record its stops with a reason given at the machine, including waiting for resin and changeovers, and sum them by press and week?
  • Does the record show which product ran on which press in each period, so that output, rejects and cycle can be read for the hours each product ran?
  • Can start-up shots and purge be recorded apart from running rejects?
  • Can part weights from the plant's own scale be joined to the record on press and time?
  • With the selling price and margin of each product entered, are the losses priced in money?

This week and this quarter on the moulding and extrusion floor

Each step turns one row of this tracker into a number for a real press or line.

This week: plant manager

  1. Find each resin the plant buys in the tracker table and note how far it moved from the first quarter. Ask purchasing for the date each contract last repriced and the index it follows.
  2. List the five presses or lines with the highest resin use a week, and ask for one week of good parts and resin use for each.

This week: production manager

  1. Weigh ten parts per shift on the three heaviest jobs and compare the average with the drawing's nominal. Price the grams over nominal at the new resin rate.
  2. Split rejects into start-up shots, purge and running rejects, and record the start-up waste for each changeover this week.

This quarter: process engineering and quality

  1. Compare actual cycle with the standard cycle on each press, by shift, for the four weeks before and after the price change, and give the stops that explain a drift their own reason.
  2. Review the regrind ratio each part spec allows and how much reject material goes to the bin instead of back to the press.

This quarter: finance and the plant team together

  1. Write down margin per part and measured resin per good part for each product, at the new resin price, and rank products by margin per kilogram for a short supply week.
  2. Run the worked example above on one real press with the plant's own weights and contract price, and keep the result as the baseline for the next edition of this tracker.

Resin cost and the line record

The official series say what resin costs; the purchase file says what the plant paid and when; the line record says what that resin did on the press or extruder: the minutes it ran, the cycle it ran at, the parts it made and rejected, and the changeovers around it. Part weights and resin use come from the plant's own scale or material system and join to the line record on press and time. Contracts, purchasing and the production plan stay in the ERP, the material system or a spreadsheet.

Fabrico is a cloud OEE and light MES platform. It shows OEE and losses by machine, line and shift, with data from the machine's PLC or a Fabrico IoT device, and operators give the reason for a stop at the machine. With the selling price and margin of each SKU entered, losses are priced in money. The line record shows which product ran on which press, the parts it made, its rejects, its cycle and its stops and changeovers, so cycle drift, start-up waste and rejects can be read for the weeks resin was dear. On manual packing stations, AI cameras (an add-on) count output. Plastics plants can see how this applies in OEE for plastics manufacturing; the building blocks are OEE software and a light MES.

Book a demo and see OEE and losses per line and shift.

What people ask next

Why did plastic resin prices rise in 2026?

The official series rose from April 2026, in the same months as oil: Brent averaged US$80.5 a barrel in January to March 2026 and US$104.4 in April to June, on the World Bank Pink Sheet. Westlake's third quarter release ties its second quarter price increases to the onset of the Middle East conflict. Prices then eased from their peaks, but in September and October they were still above the first quarter.

What is the polypropylene price in Europe now?

There is no official daily PP price, but Eurostat's trade data give a monthly value per kilogram. EU imports of PP from outside the EU (customs code 3902) were worth EUR 1.507 a kg in September 2026, against EUR 1.108 in January to March 2026, a rise of 36.0%. A plant's own contract price differs with grade, volume and terms.

Is there an official polyethylene price index?

Not as a separate resin index from the BLS: its producer price item list has one index for thermoplastic resins and plastics materials (WPU066212), and an index for unlaminated PE film and sheet (WPU072205011). For polyethylene itself, Eurostat's trade data give the monthly value of EU imports under customs code 3901, EUR 1.299 a kg in September 2026.

How does a resin price rise change the cost per part in injection moulding?

Cost per part is measured resin per good part times the resin price, and measured resin includes weight over nominal, rejects that cannot be reground and purge. In the Example plant on this page a PP pail uses 188.12 kg of resin per 1,000 good parts against a nominal 182.50 kg, EUR 283.49 per 1,000 at September's import value against EUR 205.33 in a normal first quarter week.

Which jobs should a moulder run first when resin prices spike?

While resin is the constraint, rank jobs by margin per kilogram of resin: margin per part from finance, divided by measured resin per good part from the line record. In the Example plant a 43.4 g lid outranks a pail that takes 188.12 g per good part unless the lid's margin per part is below 23.07% of the pail's. When press hours are the tighter limit, check margin per press hour too.

What does start-up waste per changeover cost at the new resin price?

Multiply the kilograms of purge and start-up parts per changeover by the new price and by the changeovers in a week. In the Example plant a blown film line makes 262.5 kg of off spec film per gauge change, worth EUR 259.61 at the first quarter EU PE import value of EUR 0.989 a kg and EUR 340.99 at September's EUR 1.299.

Sources

All sources accessed on 18 or 19 November 2026. Dates are release, publication or data update dates where a page gives one; other dates are labelled as what they are.

Track OEE and downtime in real time
See where lines lose time
Book a live demo.
See where lines lose time
See where lines lose time

Real Fabrico tiles, sample data.

By clicking the Accept button, you are giving your consent to the use of cookies when accessing this website and utilizing our services. To learn more about how cookies are used and managed, please refer to our Privacy Policy and Cookies Declaration