Mining & Aggregates: 5 OEE Tools for Equipment Performance (2026 Review)

Key Takeaways
-
Mobile vs. Fixed: Mining OEE is split. "Mobile" assets (Trucks/Shovels) need Dispatch software. "Fixed" assets (Crushers/Mills) need Processing OEE software. You often need both.
-
The Availability King: In mining, Performance (Speed) is secondary to Availability. If the Primary Crusher goes down, the entire mine stops. Downtime is the main OEE driver.
-
Tonnage is the Metric: You don't count "parts." You count "Tons per Hour." Software must integrate with belt scales and weighbridges.
-
Top Picks: We review Fabrico, Modular Mining, Hexagon, Caterpillar MineStar, and Aveva.
Mining and Aggregates is arguably the most capital-intensive industry on earth. For other industries, see our comparison of the best OEE software.
A single haul truck costs $5 million. A SAG Mill costs $50 million.
In this world, OEE (Overall Equipment Effectiveness) is not a "Continuous Improvement" project; it is a survival metric.
However, Mining OEE is unique because it is divided into two distinct worlds:
-
The Pit (Mobile Fleet): Trucks, Shovels, Loaders. Here, OEE is about "Utilization" and "Haul Cycle Time."
-
The Plant (Processing): Crushers, Conveyors, Mills. Here, OEE is about "Throughput" and "Uptime."
Standard manufacturing software fails here because it cannot handle the scale or the environment.
Here are the 5 best OEE software tools specifically designed for the harsh reality of Mining and Aggregates.
1. Fabrico (Best for Crusher Jams and Conveyor Downtime)
At a quarry, a crusher jam or a snapped belt stops the plant, and haul trucks have nowhere to dump.
Fabrico measures that fixed plant: crushers, conveyors, screens and wash plants, with Availability shown per line and shift.
Key Features for Mining:
-
Crusher Stop Log: Every jam is timed by the signal and coded by the operator on duty.
-
Sensor Connection: Plant with no accessible controller reports through a sensor added on the outside.
-
Throughput Loss: A screen or crusher running below rate shows as a Performance loss, not as a stop.
-
Shift Handover: The incoming crew sees what the last one produced and what held it back.
Best For: Aggregate quarries and mineral processing plants focused on fixed plant uptime.
2. Modular Mining (Komatsu) (Best for Pit/Fleet Dispatch)
Modular Mining (specifically their DISPATCH system) is the legendary standard for the Mobile Fleet.
If your goal is to optimize the OEE of your haul trucks, this is the tool.
It uses complex algorithms to assign trucks to shovels in real-time. It minimizes "Queue Time" (trucks waiting to be loaded) and "Hang Time" (shovels waiting for trucks).
It calculates OEE based on "Payload" and "Cycle Time." It is essential for large open-pit mines but does not manage the fixed plant processing.
Best For: Open Pit Mines optimizing Haul Truck fleets.
3. Hexagon (MineOperate) (Best for Mine Planning Integration)
Hexagon Mining connects the "Plan" to the "Plant."
Mining is unique because the "Input Material" (the ore body) changes daily. Hexagon’s software links the Geological Model to the Production OEE.
It tells you: "Your throughput dropped 5% today because the ore hardness increased in Block 4."
This context is critical. Without it, you might blame the crusher operator for a slowdown that was actually caused by geology.
Best For: Mines that need to link Production OEE to Geological Planning.
4. Caterpillar MineStar (Best for OEM Health)
Caterpillar MineStar is the health monitoring system for the Yellow Iron.
If you run a Cat fleet, MineStar is unbeatable for Asset Health.
It pulls deep telemetry from the engine control modules (ECMs), oil pressure, transmission temp, brake wear.
While it has "Fleet" (Dispatch) capabilities, its core strength for Maintenance Managers is its "Health" module. It predicts failures on mobile assets with incredible accuracy.
Best For: Mines running predominantly Caterpillar fleets.
5. Aveva (PI System) (Best for Processing Plant Data)
Aveva PI System is the standard historian for the Processing Plant (Mills/Refining).
Once the rock hits the mill, mining becomes a chemical/process industry.
Aveva collects the massive streams of data from the SCADA system (flow rates, power draw, density).
It allows Metallurgists to analyze "Recovery Rates." It is not positioned as a dispatch tool or a maintenance tool, but a data warehouse for analyzing the efficiency of the extraction process.
Best For: Metallurgical plants and refineries needing deep process data analysis.
Comparison: The Pit vs. The Plant
Which tool fits your operation?
| Feature | Fabrico | Modular Mining | Hexagon | Cat MineStar | Aveva |
| Zone Focus | Fixed Plant (Crushers) | Mobile Pit (Trucks) | Mine Plan (Geo) | Mobile Fleet (OEM) | Process (Refining) |
| Primary Metric | Availability & Downtime | Fleet Utilization | Plan vs. Actual | Asset Health | Recovery Rate |
| Maintenance Link | Native (CMMS) | Limited | Limited | Native (Health) | Integration |
| Environment | Plant Floor (Web/Mobile) | Cab Display | Office/Cab | Cab Display | Control Room |
| Tonnage Tracking | Not a focus | Truck Payload | Volumetric | Truck Payload | Flow Meters |
Conclusion: Don't Let the Crusher Stop the Trucks
In Mining, you have two OEE scores: One for the Fleet, and one for the Plant.
If you need to optimize truck cycles, Modular is the answer.
If you need to optimize engine health, Cat MineStar is the answer.
But if you need to ensure that the Processing Plant (the destination for all that rock) is running, Fabrico provides the live OEE and downtime view that keeps the belts moving and the crushers crushing.
Ready to crush your targets?
See how Fabrico measures OEE and downtime on crushers, screens, and conveyors.
Curious what honest, real-time OEE looks like on your floor?
Request a demoRelated articles

Real Fabrico tiles, sample data.











