Book a demo
Electronic Batch Record (EBR) Software for Pharma: 5 Systems Compared (2026)

Electronic Batch Record (EBR) Software for Pharma: 5 Systems Compared (2026)

EBR software for pharma, chemicals and GxP plants: what an electronic batch record is, then Werum PAS-X, MasterControl, Opcenter, Tulip and Plex compared.
Electronic Batch Record (EBR) Software for Pharma: 5 Systems Compared (2026)
Fabrico CMMS maintenance calendar showing tasks by week and month

Key Takeaways

  • The "Paper Anchor": In regulated industries (Food, Pharma, Chem), you cannot ship the product until the paperwork is reviewed. Paper batch records delay release by days.

  • The "Review by Exception": Digital EBR software flags errors during the run (e.g. a missing signature), allowing Quality teams to review only the exceptions, not every page.

  • Five systems compared: Werum PAS-X, MasterControl, Siemens Opcenter, Tulip and Plex, to help you digitize your "Travelers" and "Batch Sheets."

What is electronic batch record (EBR) software?

Electronic batch record (EBR) software replaces the paper batch record with a validated digital workflow that guides an operator through every step of a production batch and captures the result as it happens.

Instead of a printed form filled in by hand, the batch instructions become an enforced sequence: the system presents the next step, checks that each entry sits inside its allowed range, applies electronic signatures, and writes a time stamped, tamper evident record to an audit trail.

The core idea is right first time execution. Because the software validates data at the point of entry, out of specification values, skipped steps, and missing signatures are caught during the run rather than during a paper review days later.

That is what enables review by exception , where a reviewer only inspects the flagged deviations instead of re reading a full paper packet. Good root cause analysis becomes far easier when every deviation is already logged with context.

EBR vs MES vs MBR: how the terms relate

These three terms describe different layers of the same production record, and buyers often conflate them:

  • MBR (master batch record): the approved template. It defines the recipe, the ordered steps, the limits, and the required checks for a product. Nothing is produced against it directly.
  • EBR (electronic batch record): the executed instance of that template for one specific batch. It holds the actual weights, times, operators, signatures, and deviations for that run.
  • MES (manufacturing execution system): the broader platform that can orchestrate scheduling, equipment, materials, and multiple record types. EBR is often one function inside an MES, though standalone EBR tools also exist.

In short, the MBR is the plan, the EBR is the proof of what actually happened, and the MES is the wider system that may run both alongside other operations.

Alongside the batch record, every line also has an equipment side: when it runs, when it stops and why. See how MES and OEE software tracks it with real-time production monitoring, automatic downtime tracking on connected machines with stop durations and the causes operators tag, and OEE by line and shift.

Track OEE and downtime in real time
Book a demo

Frequently asked questions

What is the difference between EBR and MES?

An EBR is the digital record of one executed batch against an approved template. An MES (manufacturing execution system) is the wider platform that can manage scheduling, equipment, materials, and many record types across a plant. EBR is frequently a module inside an MES, but lightweight standalone EBR tools also exist for teams that only need to digitize the batch record itself.

What is the difference between an EBR and an MBR (master batch record)?

The MBR is the approved template that defines the recipe, ordered steps, and acceptance limits for a product. The EBR is the executed copy of that template for a single batch, holding the real values, operators, signatures, and deviations from that specific run. One MBR generates many EBRs over time.

Is EBR software compliant with 21 CFR Part 11?

Compliance depends on how a given system is configured and validated, not on the label alone. To support 21 CFR Part 11 and EU Annex 11, EBR software should provide unique user accounts, enforced electronic signatures, a secured and time stamped audit trail, and controls that protect data integrity across the ALCOA plus principles. Buyers still need to validate the system for their own processes and keep the supporting documentation.

How much does EBR software cost?

Cost is driven by scope rather than a single figure. The main levers are the number of sites and users, whether deployment is cloud or on premise, how many products and templates must be built and validated, the depth of integration with existing systems, and the effort to qualify and validate the installation.

Configuration and validation work often outweighs the raw license line, so total cost of ownership is the more useful lens than sticker price.

What are the main benefits of electronic batch records?

Electronic batch records improve data integrity by validating entries at the point of capture, reduce transcription and calculation errors, and speed up batch release through review by exception. They also give real time visibility into a run in progress and create a searchable, traceable history that connects with wider in process control data for trend analysis.

How do you implement an EBR system?

A typical rollout starts by mapping current paper batch records and defining the master templates, then configuring those templates in the system with their steps, limits, and signature points. Teams integrate the required data sources, run qualification and validation, train operators and reviewers, and usually pilot on one product line before scaling. Change control and periodic review keep the validated state intact after go live.

If you manufacture Food, Beverage, Chemicals, or Pharmaceuticals, your product is only as good as its paperwork.

The Batch Record is the story of the product. It proves you followed the recipe, cleaned the line, and performed the quality checks.

But when that record is on paper, it becomes a bottleneck.

  • Technicians miss signatures.

  • Paper gets stained or lost.

  • Quality Assurance (QA) spends days reviewing stacks of binders before they can release the pallet for shipping.

Electronic Batch Record (EBR) software solves this. It validates data at the point of entry, ensuring "Right First Time" documentation.

Here are five EBR systems, compared on what each vendor's own pages state.

Werum PAS-X (Körber)

Where it fits: Validated pharma and biologics production.

Werum PAS-X, from Körber, is a life sciences MES with electronic batch recording built in. Körber's PAS-X Suite page names "FDA 21 CFR Part 11, EU GMP Annex 11, and EMA standards", and its paperless manufacturing page describes "paper-on-glass production using PAS-X Electronic Batch Recording and Equipment Management" (both read 16.11.2026).

  • What the vendor states: review by exception, so Quality Assurance "can focus solely on flagged exceptions instead of checking the entire batch execution record". Ask: which weighing, dispensing and process equipment it connects to as shipped, and for reference sites of your size.

  • When to pick it: You are running validated pharma or biologics and the cost of a regulatory finding is greater than the cost of the implementation.

MasterControl

Where it fits: Life Sciences and heavy FDA compliance.

MasterControl builds quality management (QMS) software for life sciences, and its Manufacturing Excellence product covers "completely paperless manufacturing from production records (EBR/eDHR) and MES to electronic logbooks and asset management" (read 16.11.2026).

  • What the vendor states: "real-time review-by-exception", GMP work instructions that "embed operator guidance and training", and "complete audit trails". Ask: how a failed batch step reaches a CAPA in its QMS, and how document versions are controlled.

  • Ask: how batch steps read machine data from the PLCs on your lines, and let operators try the screens before you sign.

Siemens Opcenter (Execution)

Where it fits: Automated pharma and biotech lines, above all on Siemens automation.

Siemens Opcenter Execution is an MES family. Its Opcenter Execution Pharma page describes "master batch record (MBR) driven manufacturing" and "a review of the batch record by exception" (read 16.11.2026).

  • What the vendor states: "native integration with the production control system". It fits sites already standardized on Siemens automation.

  • Ask: the deployment plan and partner for one line, and what a mid-sized plant that only needs to digitize a paper traveler would buy.

Tulip

Where it fits: Custom batch apps.

Tulip's pharma page describes apps to "digitize electronic batch records, logbooks, weigh and dispense, and sampling", with "audit trails, e-signatures, and access controls, all pre-configured to support 21 CFR Part 11 compliance" (read 16.11.2026).

  • Pros: Flexibility: a screen can follow the layout of the old paper form, which helps training, and weigh and dispense steps can run in the app.

  • Ask: who builds and maintains the batch app logic, and how each app change is validated.

Plex (Rockwell Automation)

Where it fits: Cloud ERP with built-in production tracking.

Plex, from Rockwell Automation, is a cloud manufacturing platform. Rockwell's pages could not be read for this update, so confirm its current EBR scope with the vendor.

  • Ask: whether lot tracking runs from raw material receiving to finished goods shipment in one system.

  • Ask: whether the EBR module can be bought without the wider Plex platform, and what changing the ERP layer means for your plant.

Comparison Matrix

Feature Werum PAS-X MasterControl Siemens Tulip Plex
Primary Focus Pharma MES + EBR Quality (QMS) Pharma MES Custom Apps ERP / MES
Validation Ask the vendor Ask the vendor Ask the vendor Ask the vendor Ask the vendor
User Experience Ask the vendor Ask the vendor Ask the vendor Ask the vendor Ask the vendor
Deploy Time By scope (ask the vendor) Ask the vendor Ask the vendor Ask the vendor Ask the vendor
Where it fits Large pharma / biologics Life Sciences QMS Automated lines Custom workflows ERP-led plants

Where Fabrico Fits Around Your EBR

Fabrico is not an electronic batch record system. It is OEE software and a light MES with maintenance (CMMS) built in, and it runs next to your EBR, not inside it.

Once an EBR is in place, batch output still depends on things the EBR does not measure: equipment uptime, short stops and maintenance at the machine. That is the layer Fabrico covers.

How the two systems work together:

  • EBR (Werum, MasterControl, Siemens, Plex, etc.), owns recipe execution, batch genealogy, electronic signatures, GxP audit trail.

  • Fabrico, owns the equipment side: OEE measurement (including a camera add-on that counts output on lines with no usable machine signal), preventive maintenance, work order execution, asset history.

  • Where they meet: the EBR and Fabrico can exchange data through Fabrico's REST API and webhooks, so the equipment history sits alongside the batch record.

If you already have an EBR and you're asking why batches still slip on yield, look at equipment performance next. That is the layer Fabrico covers.

Summary: Speed Up Your Release

The goal of an EBR is to ship good product faster, with a clean audit trail. Pick based on what your plant actually needs to validate:

  • Choose Werum PAS-X if you are running validated pharma or biologics at scale and need a deep pharma MES.

  • Choose MasterControl if your bottleneck is the QMS side, document control, CAPA, training records.

  • Choose Siemens Opcenter if your site is already standardized on Siemens PLC / DCS hardware and you want one ecosystem.

  • Choose Tulip if you have an internal engineering team that can own custom batch apps and you want to shape the screens yourself.

  • Choose Plex if you're open to replacing the ERP layer and want EBR as part of one platform.

Already have an EBR? If equipment uptime, maintenance, and OEE are still your bottleneck, that's where Fabrico runs. Book a Fabrico demo to see how an MES and OEE platform with maintenance (CMMS) built in plugs into an EBR-equipped plant without replacing it.

Turn downtime into a number your team can actually act on.

Request a demoContact us
Track OEE and downtime in real time
See where lines lose time
Book a live demo.
See where lines lose time
See where lines lose time

Real Fabrico tiles, sample data.

By clicking the Accept button, you are giving your consent to the use of cookies when accessing this website and utilizing our services. To learn more about how cookies are used and managed, please refer to our Privacy Policy and Cookies Declaration