EV Program Changes Tracker: OEM Delays, Cuts and What the Supplier Measures
In short: When an OEM delays, cuts or cancels an EV program, the supplier's line keeps the cost it was built with while the call-off falls below the volume it was quoted on. Five numbers decide what happens next: fixed cost per part, the shift pattern, OEE with its planned time in view, the hours freed for other programs, and the shortfall file behind any price reopener or cancellation claim. This tracker logs the OEM and supplier documents each month, and what each one tells a tier 1 or tier 2 supplier to measure.
- Cases, October 2026: Volkswagen ID. Golf paused and ID.4 ended in Chattanooga; Ford EV wholesales down 31%; a USD 24.0 million termination payment at Sensata; Volvo EX60 ramp-up behind plan; GM's supply base talks.
- Example plant: a battery tray weld line quoted at 2,340 trays a week now gets 1,310. Fixed cost per tray rises from USD 25.06 to 44.77, and USD 25,816.03 a week goes unrecovered; a shift change wins back USD 10,083.15 to 10,360.35 of it.
Tracker, updated 18 November 2026. Next update: December 2026, with the documents released since. Sources are listed at the end.
An OEM's EV decision reaches a supplier as a number: the weekly call-off for a part, now well below the volume in the nomination. The line was sized, tooled and staffed for the quoted volume, and its fixed costs do not fall with the call-off. What the supplier does next, and what it can claim, depends on measured rates by line and shift, the kind of record set out in OEE for automotive Tier 1 suppliers, and on a production record that shows which product ran on which line and for how long, the job of MES for automotive suppliers. This page logs the OEM and supplier documents of the month, then works through one Example plant: the cost per part at the new volume, three shift patterns, the OEE trap, the freed hours and the evidence file.
The tracker: EV program changes, autumn 2026
Each row comes from the OEM's or supplier's own dated release or filing, read at source. Europe and North America only; battery cell plants are left out, because this page is about the lines that make parts for the vehicles.
| Document date | Company | Program or scope | What changed, in the document's words | Document |
|---|---|---|---|---|
| 30 October 2026 | Volkswagen (Brand Group Core) | ID. Golf; ID.4 in Chattanooga, Tennessee | Development of the future ID. Golf paused until the investments can be secured; ID.4 production in Chattanooga discontinued, "already been implemented" | Nine-month results release |
| 28 October 2026 | Ford Motor Company | Ford Model e: F-150 Lightning, Mustang Mach-E, three cancelled EVs | Q3 wholesales down 31% (34,000 against 50,000); USD 175 million of cash charges in Q3, mainly contractual commitments on the cancelled programs; about USD 500 million more expected | Form 10-Q, Q3 2026 |
| 27 October 2026 | Sensata Technologies (supplier) | An unnamed customer's EV program | Q3 revenue includes a USD 24.0 million termination payment from a customer for the cancellation of an EV program | Q3 2026 results release (Form 8-K) |
| 23 October 2026 | Volvo Cars | EX60 (Europe) | Ramp-up taking longer than planned because of new industrial technology such as cell-to-body; over 50,000 European orders | Q3 2026 report release |
| 20 October 2026 | General Motors | EV capacity and manufacturing footprint, North America | Nine-month EV charges of USD 3.6 billion, including USD 2.5 billion for ongoing commercial negotiations with the supply base and JV partners | Form 10-Q and results release, Q3 2026 |
Sources: the documents linked in each case below. The date is the date on the document; where a program decision was taken earlier, the case says so.
Three readings of the table:
- Delay, cut and cancellation are different call-offs. A paused program (ID. Golf) has no call-off yet, but engineering hours already spent. A rate cut (Mach-E) keeps the part running at a lower volume. A cancellation (the Ford programs, Sensata's customer) ends the call-off and leaves the dedicated assets.
- The OEMs are already paying. Ford's and GM's filings book cash charges for contractual commitments and supplier negotiations, and Sensata books a termination payment as revenue. Money moves where the supplier can document what the change cost.
- Europe is not one market. The ACEA release of 22 October 2026 puts battery-electric cars at 22.7% of EU registrations from January to September 2026, up from 16.1% a year earlier. A European call-off that falls is a program event (a platform, a ramp-up, a plant), not a market collapse, and the supplier's case has to rest on its own program's numbers.
Why the call-off falls below the line's volume
A supplier is nominated on an OEM volume and quotes a piece price that recovers its line, tooling and engineering over that volume. When the OEM changes the program, three things happen at once, and the filings of the period show each of them.
- The volume drops, the cost does not. STRATTEC's Form 10-Q for the quarter ended 29 March 2026 (signed 8 May 2026) states that customer programs were cancelled or significantly reduced as OEMs adjusted EV production plans, which took USD 3.5 million off the quarter's sales against a year earlier. The same filing records a USD 0.6 million recovery of costs it had already expensed on cancelled OEM EV programs, plus a USD 0.7 million recovery for program cancellations in its selling, administrative and engineering line.
- The engineering is stranded. Dauch's Form 10-Q for the first quarter of 2026 (signed 8 May 2026) says a large customer terminated purchase orders for e-Beam axles for a future program in April 2024, that a settlement was reached in January 2026, and that about USD 28 million arrived in the first quarter of 2026 to reimburse capitalised engineering, design and development costs. That is about 21 months from termination to settlement, on costs the supplier could show it had capitalised.
- The tooling loses its value. GM's Form 10-Q for the third quarter of 2026 says its 2025 EV charges included supplier commercial settlements, contract cancellation fees and the cost of writing down EV tooling and equipment to its nominal salvage value. For the supplier on the other side, tooling at salvage value is a dedicated asset with no part to recover it.
The two supplier filings are independent of each other and of the OEMs, and they describe the same mechanism: a recovery arrives months after the program change, and it covers what was documented. Neither says how the claim was calculated, so the method below is the supplier's own work, built from its line data.
Dated cases, newest first
Each case ends with what its own document tells a supplier to check. A new month's cases go on top, with the date of the document.
Volkswagen, release of 30 October 2026: a paused program and a closed line
The Brand Group Core release of 30 October 2026 reports the nine-month results of the group's volume brands. It says Volkswagen will temporarily pause development work on the future ID. Golf until the necessary investments can be secured, and refers to the discontinuation of ID.4 production in Chattanooga as already implemented. The Volkswagen Passenger Cars brand earned an operating result of EUR 813 million in nine months (EUR 1,476 million a year earlier), a 1.3% margin, while Brand Group Core sold 3.75 million vehicles, 0.5% fewer.
- A paused development is a cost already spent. A supplier nominated on the ID. Golf before the pause has engineering hours, prototype tools and test parts with no series volume behind them yet. Log them now by part number and date, the way Dauch's e-Beam reimbursement rested on capitalised engineering, design and development costs.
- Chattanooga is a call-off at zero. For parts built only for the ID.4 in Chattanooga, the shortfall is the whole quoted volume. The file needs the last call-off date, the dedicated tools and fixtures, the stock on hand and the line hours that the part used to fill.
- A 1.3% margin customer reads every claim closely. With the passenger car brand at a 1.3% margin for nine months, a reopener request has to carry measured hours and costs, not a percentage on the piece price.
Ford, Form 10-Q of 28 October 2026: a rate cut and three cancellations
Ford's Form 10-Q for the third quarter of 2026, signed 28 October 2026, reports Ford Model e wholesales of 34,000 in the quarter against 50,000 a year earlier, down 31%, mainly because the F-150 Lightning was discontinued and because of the "right-sizing of Mustang Mach-E production to market demand". For nine months, wholesales were 97,000 against 141,000. The filing recalls the December 2025 decision to cancel three planned EVs and end production of the current F-150 Lightning, and says Ford recorded USD 175 million of cash charges in the third quarter, primarily for contractual commitments related to those programs, with about USD 500 million more expected.
- Mach-E is a rate cut, not an end. "Right-sizing to market demand" means the part keeps running at a lower call-off. That is the shift-pattern decision below, not a cancellation claim.
- Contractual commitments are being paid now. The third-quarter cash charge sits in the same quarter as the 10-Q. A supplier to the three cancelled programs whose claim is not yet filed is asking while Ford puts its further costs for these actions at about USD 500 million.
- Nine months tell the trend. 141,000 to 97,000 wholesales is the OEM's own figure for the falling call-off. A supplier's file that shows its weekly call-offs over the same nine months against the quote speaks the customer's language.
Sensata, release of 27 October 2026: a termination payment in revenue
Sensata's third-quarter release of 27 October 2026 reports revenue of USD 1,003.6 million, up 7.7%, and says it included a USD 24.0 million termination payment from a customer related to the cancellation of an electric vehicle program. Without the payment, revenue would have been USD 979.6 million. The release does not name the customer or the program.
- The payment is 2.39% of the quarter. USD 24.0 million of USD 1,003.6 million is enough to move a supplier's reported growth; Sensata states the figure with and without it. A supplier with a pending claim can show its own quarter the same way, so the customer and the auditors see the claim as one item.
- A termination payment is a settled number. It ends a negotiation that needed a cost basis: tools, engineering, stock and the margin on volume not delivered. The file behind it is the one described in the last section of this page.
- Book it apart from the run rate. Revenue without the payment is the run rate. A plant that mixes a one-time payment into its cost per part hides the volume problem that caused it.
Volvo Cars, release of 23 October 2026: a ramp-up behind plan
Volvo Car AB's third-quarter release of 23 October 2026 (the company's regulatory release, as republished by Inderes) says the EX60 has over 50,000 European orders, and that because of new industrial technology such as cell-to-body it is taking longer than planned to ramp up production, with built volumes steadily improving. Revenue was SEK 66.9 billion against SEK 86.4 billion a year earlier, and the company expects a structural reduction of about 2,500 jobs, 2,000 of them in Sweden.
- A slow ramp is a temporary shortfall. With 50,000 orders and volumes rising, the EX60 call-off is behind the ramp curve, not cut. A supplier staffed for the planned ramp keeps the crews and trains them, and logs the hours as "waiting for call-off" by week, rather than changing the pattern for good.
- Track the call-off against the ramp curve. The nomination's ramp curve is the baseline. Each week's call-off against it is the shortfall the supplier carries for the OEM's technology problem, and the evidence if the ramp stalls.
- Watch the indirect cost cuts. A customer cutting an additional SEK 5 billion of indirect spend and variable costs, as the same release says, will look at supplier prices. Measured rates and a clean cost per part are the defence.
General Motors, Form 10-Q of 20 October 2026: the supply base negotiations
GM's Form 10-Q for the third quarter of 2026, signed 20 October 2026, says EV strategic realignment net charges were USD 3.6 billion for the nine months, primarily USD 2.5 billion for ongoing commercial negotiations with the supply base and joint venture partners, USD 1.3 billion of losses on supply agreements and USD 0.5 billion for compliance-related assets, net of USD 0.7 billion of recoveries. Cash outflows on these charges were USD 4.2 billion in nine months. The results release of the same day shows the quarter's EV adjustment at USD 238 million, against USD 1,592 million in the third quarter of 2025. The 10-Q says GM believes it has substantially completed the recognition of material cash charges for the realignment.
- The window is closing. A third-quarter adjustment of USD 238 million against USD 1,592 million a year earlier, and the words "substantially completed", say the large settlements are behind. A supplier with an open GM EV claim is late and needs its file ready this month.
- Losses on supply agreements are the supplier's volume. USD 1.3 billion of losses on supply agreements is the OEM's side of contracts whose volume will not be taken. The supplier's side is the shortfall per part, priced.
- Tooling at salvage value. The 2025 charges wrote EV tooling down to nominal salvage value. Supplier-owned tooling on the same programs has no part left to amortise it, so its book value belongs in the claim.
Earlier cases are added only when the OEM's or supplier's own document can be read; reports based on internal memos or anonymous sources are not listed.
Five numbers to measure when the call-off drops
An OEM release names a program. The supplier's decision rests on five numbers from the plant floor, each with a place in the record.
- Fixed cost per part at the new call-off. Weekly fixed cost (line depreciation, dedicated tooling amortisation, indirect staff and floor space) divided by the parts actually called off. The arithmetic is the one in break-even analysis in manufacturing, run backwards from the volume the OEM now takes, and economies of scale in manufacturing explains why it moves so fast.
- Hours the call-off needs. Parts called off divided by good parts per planned hour, measured by shift. This sets the shift pattern, the subject of shift patterns in manufacturing.
- OEE with its planned time in view. OEE on the planned time, beside planned time as a share of the calendar week. The trap is set out below and in planned production time vs operating time.
- Hours freed for other programs. Staffed hours the line no longer needs for the cut part, by week. Quoting them to another program fills the line; leaving them as idle time spreads the fixed cost over nothing.
- The shortfall in money. Quoted volume minus call-off, by week, times the fixed cost each part was meant to recover, and the dedicated assets at book value. That is the number in a price reopener or a cancellation claim.
Worked example: a tray weld line at 56% of its quoted volume
Example plant. Every operating figure in this section is Example data; the labour rate and the industry margins are sourced. The plant, the part and the customer are not any company named above.
A tier 1 welds aluminium battery pack trays for one EV program on a robotic line. The nomination volume was 2,340 trays a week. The line has an ideal rate of 28 trays an hour and runs three shifts a day, five days a week, 7.5 planned hours a shift: 112.5 planned hours a week. Measured OEE is 76%, so the line makes 28 x 0.76 = 21.28 good trays per planned hour, or 112.5 x 21.28 = 2,394 a week, enough for the quote. Each shift has a crew of six. The piece price is USD 286 a tray. Weekly fixed cost (line depreciation, dedicated tooling amortisation, indirect staff, floor space) is USD 58,650.
The OEM cuts the program's rate. The new weekly call-off is 1,310 trays: 1,310 / 2,340 = 56.0% of the quote, a shortfall of 1,030 trays a week, 44.0%.
Step 1: fixed cost per tray. At the quote: 58,650 / 2,340 = USD 25.06 a tray. At the call-off: 58,650 / 1,310 = USD 44.77 a tray. The difference, USD 19.71, is 19.71 / 286 = 6.89% of the piece price.
Step 2: the unrecovered fixed cost. The piece price recovers USD 25.06 a tray of fixed cost, so 1,310 trays recover 58,650 x 1,310 / 2,340 = USD 32,833.97 a week. The rest, 58,650 minus 32,833.97 = USD 25,816.03 a week, is not recovered; over a 13-week quarter, 25,816.03 x 13 = USD 335,608.39.
Step 3: anchor it to the industry. The NYU Stern margin data, as of January 2026, give the auto parts industry (35 listed United States firms) a pre-tax, pre-stock compensation operating margin of 6.37% and EBITDA of 9.04% of sales. A cost increase of 6.89% of the piece price is more than the industry's operating margin, and 6.89 / 9.04 = 76.2% of its EBITDA margin. A supplier earning the industry's operating margin earns nothing on this part after the cut.
Step 4: the hours the call-off needs. 1,310 / 21.28 = 61.56 planned hours a week at the measured OEE. The three patterns that could deliver it:
| Pattern (Example data) | Planned hours a week | Good trays at 76% OEE | Covers 1,310? | Crew hours a week | Planned time as share of 168 h |
|---|---|---|---|---|---|
| A: 3 shifts x 5 days, as quoted | 112.5 | 2,394 | Yes, with 50.94 h spare | 675 | 67.0% |
| B: 2 shifts x 5 days | 75 | 1,596 | Yes, with 13.44 h spare | 450 | 44.6% |
| C: 2 shifts x 4 days | 60 | 1,276.8 | Only at 78.0% OEE or more | 360 | 35.7% |
Example data. Spare hours = planned hours minus 61.56. Pattern C needs 1,310 / (28 x 60) = 78.0% OEE, two points above today's.
Step 5: price the shift change. The BLS series for motor vehicle parts manufacturing gives average hourly earnings of production and nonsupervisory employees of USD 32.01 in August 2026 and USD 32.89 in September 2026 (preliminary). Pattern B saves 675 minus 450 = 225 crew hours a week: 225 x 32.01 = USD 7,202.25 to 225 x 32.89 = USD 7,400.25. Pattern C saves 315 crew hours: 315 x 32.01 = USD 10,083.15 to 315 x 32.89 = USD 10,360.35. These are earnings only; benefits, notice periods and any agreement with the workforce come on top, and are not priced here.
Step 6: what is left for the reopener. Fixed cost does not change with the pattern, so the gap after pattern C is 25,816.03 minus 10,360.35 = USD 15,455.68 to 25,816.03 minus 10,083.15 = USD 15,732.88 a week. Per tray called off: 15,455.68 / 1,310 = USD 11.80 to 15,732.88 / 1,310 = USD 12.01, which is 4.13% to 4.20% of the piece price. That is the reopener the supplier can defend after doing its own part: USD 11.80 to 12.01 a tray, rather than the USD 19.71 of the raw fixed-cost rise.
Step 7: the freed hours. Under pattern A the line has 50.94 staffed hours a week it no longer needs for this part; under pattern B, 13.44. Those hours can be quoted to another program only if the line can weld that program's part, so the changeover between the two parts and the first good part after it have to be measured before the quote, not after.
Two caveats. The fixed cost per week is Example data; a real plant takes it from its own cost centre, and the industry margins only show the scale of the problem. And the reopener does not include the dedicated tooling's book value or any stranded engineering, which go into the claim separately when the program is cancelled rather than cut.
Book a demo and see OEE and losses per line and shift.
Three shift patterns for a lower call-off: choosing
The worked example gives three ways to run the line. Each fits a different kind of program change.
| Pattern | Choose it if | Cost anchor on this page | Watch for |
|---|---|---|---|
| Keep 3 shifts x 5 days and fill the spare hours | The drop is temporary (a ramp-up behind plan, as at the EX60) or another program's part can run on the line | No labour saving; 50.94 spare hours a week to fill | Spare hours left unfilled, and OEE that hides them (next section) |
| 2 shifts x 5 days | The rate cut looks lasting (a "right-sizing", as at the Mach-E) and the line's OEE varies by shift | USD 7,202.25 to 7,400.25 of crew earnings a week | 13.44 spare hours still to fill; crews to move to other work |
| 2 shifts x 4 days | The cut is lasting and the line can hold 78.0% OEE or more | USD 10,083.15 to 10,360.35 a week; reopener of USD 11.80 to 12.01 a tray | No slack: one bad week misses the call-off |
Questions for the OEM buyer, in writing, before choosing:
- Is the new call-off a rate cut for the rest of the program, a delay of the ramp, or a step towards cancellation?
- Which volume will the OEM confirm for the next two quarters, and will it accept a price reopener tied to that volume?
- Does the OEM want the line kept at quoted capacity (and pay for it), or released for other programs?
- If the program ends, which tools and fixtures are the OEM's, and how will their disposal be agreed?
- What engineering changes since the nomination will the OEM recognise as costs?
OEE when the planned time shrinks
When the call-off drops, the line's planned time is cut to match, by shifts removed or by hours booked as "no demand". OEE is calculated on planned time, so if the line runs well when it runs, availability stays high and OEE looks unchanged. The line is idle for more of the week, and OEE does not show it.
| Measure (Example plant) | At the quote, pattern A | At the call-off, "no demand" hours excluded | At the call-off, idle hours kept in planned time |
|---|---|---|---|
| Planned hours a week | 112.5 | 61.56 used | 112.5 |
| OEE | 76% | 76% | 1,310 / (28 x 112.5) = 41.6% |
| TEEP (good trays / 28 x 168 h) | 2,394 / 4,704 = 50.9% | 1,310 / 4,704 = 27.8% | 27.8% |
Example data. Both call-off columns describe the same week; they differ only in how the idle hours are booked.
The fix is to report both numbers together: OEE on planned time for how the line performs, and planned time as a share of the calendar, or TEEP, for how much of the week it is used. TEEP fell from 50.9% to 27.8% while OEE stayed at 76%. Booking the idle hours with their own reason ("no call-off: program X") keeps the hours visible by part, which the shortfall file needs, and the same idea is behind capacity utilization. The cost of idle hours that still draw power is covered in standby and idle energy losses.
The opposite mistake is just as costly. Keeping idle hours inside planned time drops OEE to 41.6%, and a plant that reads that as a performance problem starts fixing a line that runs well. The line's rate, measured by shift, is also the supplier's best evidence that the shortfall is the OEM's volume, not the supplier's output.
The shortfall file: evidence for a price reopener or a claim
The filings of the period show what OEMs pay for: contractual commitments (Ford), supply agreements and negotiated settlements (GM), capitalised engineering (Dauch), previously expensed costs (STRATTEC), a termination payment (Sensata). Each needs a document behind it. The file below gathers them by part number, starting from the day the call-off changes.
| Evidence | Where it comes from | What it proves |
|---|---|---|
| Nomination volume and ramp curve | Nomination letter, quote, capacity agreement | The volume the line and the price were built for |
| Weekly call-off against the quote | The OEM's releases (EDI call-offs), by part number | The shortfall, week by week, from the first change |
| Measured rate and OEE by line and shift | The production record | That the line could make the quoted volume, so the gap is volume, not output |
| Idle hours with a "no call-off" reason | Stop reasons on the line, summed by week | The hours the program left empty |
| Fixed cost per week and per part | Cost centre accounts, depreciation schedule | The unrecovered cost, as in Step 2 |
| Mitigation taken | Shift pattern changes, crews moved to other work, hours quoted to other programs | That the supplier reduced the loss before asking (Steps 5 and 7) |
| Dedicated tooling and engineering | Asset register at book value; engineering hours and capitalised costs by program | The stranded assets a cancellation leaves |
Two rules keep the file usable. Start it the week the call-off changes, because the 21 months between Dauch's termination and settlement show how long a claim can run, and a file rebuilt later is weaker. And keep the one-time payments out of the run rate, as Sensata's release does, so that the cost per part keeps showing the volume problem. Where the program moves to another site or a new part replaces the old one, the approval steps are those in the PPAP production part approval process guide; the tooling side is in tooling cost of ownership tracking.
This week, this quarter
Plant, production, finance and sales managers can split these as the plant runs.
This week
- List every part number on a program named in the tracker, with the line, the quoted weekly volume and the latest call-off.
- Add a stop reason "no call-off" with the program as a second level, and brief the shift leaders, so idle hours stop disappearing into planned time.
- Put OEE on planned time and TEEP side by side in the weekly line review.
- Calculate fixed cost per part at the quote and at the call-off, as in Steps 1 and 2.
This month
- Measure good parts per planned hour by shift for four weeks, and work out the hours the new call-off needs.
- Price two shift patterns against the current one with the plant's own labour rates, and check that the faster pattern holds the OEE it needs.
- Open the shortfall file and fill the first five rows.
This quarter
- Agree the pattern with the workforce and the confirmed volume with the OEM buyer, using the questions above.
- Quote the freed hours to another program once the changeover is measured.
- Send the reopener or the claim with the file, and repeat the cost per part each month, because the call-off is the number that keeps moving.
What the record has to hold
Every number on this page comes from one record kept on the supplier's lines: which product ran, for how long, at what rate, by line and shift, and why the line stood when it stood. A program change in an OEM filing says the volume is gone. The record says what that costs the supplier, and proves that the shortfall is the customer's volume and not the supplier's output.
Fabrico is a cloud OEE and light MES platform. It shows OEE and losses by machine, line and shift, with data from the machine's PLC or a Fabrico IoT device, and operators give the reason for a stop at the machine, so idle hours with a reason such as "no call-off: program X" are summed by week. With the selling price and margin of each SKU entered, losses are priced in money. On manual stations, AI cameras (an add-on) count output. Call-offs, quotes and contracts stay in the ERP; Fabrico supplies the measured rates the plan and the claim are built on. The building blocks are OEE software and a light MES for the production record.
Book a demo and see OEE and losses per line and shift.
What people ask next
What happens to a supplier when an OEM cancels an EV program?
The call-off for the program's parts ends, but the line, the dedicated tooling and the engineering already spent remain. The filings of autumn 2026 show OEMs paying for this: Ford booked USD 175 million of cash charges in the third quarter, mainly for contractual commitments on cancelled programs, and Sensata reported a USD 24.0 million termination payment for a cancelled EV program. Both rest on documented costs, so the supplier's first job is the file: quoted volume, call-offs, idle hours, fixed cost and the assets at book value.
Can a supplier claim compensation when EV volumes fall below the quote?
A price reopener or a settlement can be negotiated, but only on evidence. GM's Form 10-Q of 20 October 2026 shows USD 2.5 billion in nine months for ongoing commercial negotiations with its supply base and joint venture partners, and Dauch received about USD 28 million in early 2026 to reimburse capitalised engineering on terminated e-Beam axle orders. The claim needs the weekly shortfall against the nomination volume, priced at the fixed cost each part was meant to recover.
How do you calculate fixed cost per part when the volume drops?
Divide the line's weekly fixed cost (depreciation, dedicated tooling amortisation, indirect staff, floor space) by the parts actually called off. In the Example plant on this page, USD 58,650 a week over 2,340 trays is USD 25.06 a tray, and over 1,310 trays it is USD 44.77, a rise of USD 19.71 or 6.89% of the piece price.
Should a supplier cut a shift when an EV program is cut?
Only if the cut looks lasting and the line can still make the call-off. Work out the hours the new volume needs from good parts per planned hour, measured by shift, then compare patterns. In the Example plant, two shifts on four days save 315 crew hours a week but need OEE of at least 78.0%; a ramp-up behind plan, like the EX60 case, argues for keeping the crews.
Why does OEE look fine when EV volumes drop?
Because OEE is calculated on planned time, and planned time shrinks with the call-off. If the line runs well when it runs, OEE stays the same while the line stands idle for more of the week. Report TEEP or planned time as a share of the calendar beside OEE: in the Example plant OEE stayed at 76% while TEEP fell from 50.9% to 27.8%.
Which EV programs were delayed or cut in autumn 2026?
From the companies' own documents: Volkswagen paused development of the ID. Golf and has ended ID.4 production in Chattanooga (30 October 2026); Ford's EV wholesales fell 31% in the third quarter after the F-150 Lightning ended and Mach-E output was cut (28 October); Volvo Cars said the EX60 ramp-up is taking longer than planned (23 October); GM reported USD 3.6 billion of EV realignment charges for nine months (20 October).
Sources
All sources accessed on 18 November 2026. Dates are release, filing or signature dates where a page gives one; other dates are labelled as what they are.
- Volkswagen AG, Brand Group Core holds its own in a difficult environment: special items significantly impact overall result, release dated 30 October 2026
- Ford Motor Company, Form 10-Q for the quarter ended 30 September 2026 (SEC EDGAR), signed 28 October 2026
- Sensata Technologies, third quarter 2026 financial results release, Form 8-K exhibit (SEC EDGAR), release dated 27 October 2026
- Volvo Car AB, Volvo Cars Q3 2026: taking decisive action to navigate a very tough environment (regulatory release, as republished by Inderes), release dated 23 October 2026
- General Motors Company, Form 10-Q for the quarter ended 30 September 2026 (SEC EDGAR), signed 20 October 2026
- General Motors Company, third quarter 2026 results release and financial tables, Form 8-K exhibit (SEC EDGAR), release dated 20 October 2026
- Dauch Corporation, Form 10-Q for the quarter ended 31 March 2026 (SEC EDGAR), signed 8 May 2026
- STRATTEC Security Corporation, Form 10-Q for the quarter ended 29 March 2026 (SEC EDGAR), signed 8 May 2026
- ACEA, New car registrations: +5.7% in September 2026 year-to-date; battery-electric 22.7% market share, release dated 22 October 2026
- U.S. Bureau of Labor Statistics, Average hourly earnings of production and nonsupervisory employees, motor vehicle parts manufacturing (CES3133630008), data to September 2026, September preliminary
- Aswath Damodaran, NYU Stern School of Business, Operating and Net Margins by Industry Sector (United States), data as of January 2026
Related articles
Latest from our blog

Real Fabrico tiles, sample data.


